XR/ 4-TEC Chassis

 
REV XP

Carbon Fiber/Kevlar® Skid Plate Kit—XR Chassis

REV XR accessories
 
XR Skid Plates (outlined in red) precisely
protect every square inch of the fragile underbelly.
(Click to enlarge photo)
 
REV XR accessories
 
Outstanding protection to the exhaust tips & chain case.
(Click to enlarge photo)
 
   

Using the inspiration of XP Chassis Skid Plates, we created the ultimate Skid Plate solution for the XR Chassis. This original Skid Plate design covers all of the fragile underbelly components of the XR Chassis.

Specific Areas of coverage include chain case, brake case, front heat exchanger, exhaust tips, primary clutch, aluminum belly, bulkhead, a-arms, and front cowling.

Skid Plate installation is quick and simple using existing factory mounting locations and high quality German metric fasteners.

Access  to oil drain plus is easy making frequent oil changes simple & quick.

Skids are constructed from our durability proven combination of Carbon Fiber, Kevlar® & ballistic grade “E” glass.

These Skid Plates are specifically built for heavy abuse and the inherent variable conditions of cross country snowmobile riding.

 

 

Kit Price: $649.00


To Order, Use Our Online Store
or call (774) 849-5097

 

REV XR
  REV XR
Front XR Skid Plate protects bulkhead, a-arms,
and front cowl with an extreme precision fit.
(Click to enlarge photo)
 
Easy drain plug access for quick oil changes.
(Click to enlarge photo)

 





REV XP

Economy Drivetrain Protection Kit - XP/XR/XS/XM Chassis

REV Xp  

(Click to enlarge photo)

 

This kit provides heavy duty protection for the most fragile parts of your Rev XP/XR.  Kit includes two precision molded composite guard cups to protect the chain case and brake case.  The kit also includes a rectangular piece of 3/16” thick composite material, that can be “sandwiched” between an existing BRP or Holeshot full body style skid plastic skid plate. The rectangular composite material will protect the front heat exchanger front getting ripped off or other catastrophic damage. Kit includes all needed mounting hardware and mounting instructions.

 

Price: $249.00
To Order, Use Our Online Store
or call (774) 849-5097

       
REV Xp  
REV Xp
REV Xp

Side
(Click to enlarge photo)

 

Exhaust side
(Click to enlarge photo)

       Three pieces
       (Click to enlarge photo)


REV XP

Carbon Fiber/Kevlar® A-Arm Braces

REV XP A-Arm Braces  
Includes plastic straps & pre-installed adhesive strips
(Click to enlarge photo)
 
   
REV XP A-Arm Braces  
Deep channels provide shock absorbing strength
(Click to enlarge photo)
 

These A-Arm Braces are AWESOME! With less than 1/16” tolerance between the Braces and the A-Arms the precision “snap fit” is very impressive. These A-Arm Braces are designed to take direct hits and absorb shock from foreign objects like rocks, logs, and stumps.

Each A-Arm Brace has two molded channels that are bridged together flush with the top of the A-Arm tubes. The angles associated with the molded channels provide amazing strength, while the flush mounted bridge leaves nowhere for snow to pack!

A-Arm Braces mount simply and precisely with a special, double-sided, high-strength, industrial adhesive tape (rated for –40°) and ultra heavy-duty plastic cam straps each capable of holding 250 lbs of weight (rated for –80°).

The XP A-Arm Braces are an innovative new approach to A-Arm protection and fine addition to your XP!

Price: $239
To Order, Use Our Online Store
or call (774) 849-5097

       
REV XP A-Arm Braces  
REV XP A-Arm Braces
Large coverage area!
(Click to enlarge photo)
 
Clean, precision fit!
(Click to enlarge photo)

REV XP

Carbon Fiber Air Filter Guard/Hood Deflector - XR Chassis

Protect your XR Chassis Air Filter from branches and getting plugged up from powder. This deflector does an

impressive job protecting the fragile air filter element from common damage associated with sagging trees in the trail after heavy snow or just your buddy’s roost. Air Filter Guard/Hood Deflector offers great protection without obstructing air flow. Air Guard/Hood Deflector mounts quick and easy with stainless metric hardware.

Price: $84

To Order, Use Our Online Store
or call (774) 849-5097

   
  REV XR
 
XR Chassis AFG/Hood Deflector mounts easy
with provided hardware..
(Click to enlarge photo)

REV XP
   
REV XR  
Mounts to hood with stainless metric hardware.
(Click to enlarge photo)
 

Carbon Fiber Hood Deflector (Throttle Side) — XR Chassis

Throttle Side Deflector balances out the look of the Air Filter Guards. It also allows stock body panel to be trimmed off allowing hot air to be released from the motor compartment. Mounts quick and easy to hood with stainless metric hardware. 

Price: $84

To Order, Use Our Online Store
or call (774) 849-5097

   
REV XR
 
Throttle Side Hood Deflector allows plastic body panel (marked with X & red line) to be removed for hot air release from motor compartment. (Click to enlarge photo)
 

REV XP
Carbon Fiber Hood Deflector Kit — XR Chassis
 
REV XR
 
 
XR Chassis Hood Deflectors match sleek body lines &
provide a functional, protective purpose. (Click to enlarge photo)
 



Kit Includes both Deflectors:

  • Carbon Fiber Vent/ Hood Deflector (throttle side).

  • Carbon Fiber Air Filter Guard/ Hood Deflector.


    Kit Price: $149

To Order, Use Our Online Store
or call (774) 849-5097


REV XP

EXTREME/HIGH COVERAGE Carbon Fiber Hand Guards – XP Chassis

     
REV XP accessories
REV XP accessories
 
Incredible hand protection
(Click to enlarge photo)
Geometric shape matches REV XP body styling
(Click to enlarge photo)
 

Our NEW Hand Guards for 2009 offer even more coverage than our Original! Carbon Fiber Hand Guards! About 35% more Coverage! We designed a hand guard that truly protects your entire exposed hand and handle bar area of your sled. We also kept the hand guards simple and sleek.

REV Xp
 

Complete frontal coverage for your REV XP
(Click to enlarge photo)

 

These HIGH COVERAGE Hand Guards have a beautiful, geometric, modern shape with a deep high gloss finish. With the dimensions of 18.5” x 11.5” of coverage per Hand Guard these Hand Guards offer the equivalent protection of a high wind shield without the equivalent look.

Hand Guards are constructed of carbon fiber, Kevlar®, and woven fiberglass. They are very strong and capable of absorbing any type of impact.

These Hand Guards do an impressive job of protecting your hand and body from wind, flying roost, and tree branches.

 
REV Xp
Hand Guards are rubber mounted to CNC
machined billet aluminum brackets

(Click to enlarge photo)

 

Each Hand Guard is equipped with a super high quality CNC machined aluminum bracket system. The aluminum brackets are engineered to withstand vibration, tree branches, and rollover contacts. All aluminum brackets are fastened together using high quality stainless steel metric hardware. The bracket system also has two horizontal adjustments to allow personalized shield fit.

Hand Guard sets may be purchased without brackets.

Price: Hand Guard Kit with Billet Brackets- $259.00

Price: Carbon Fiber Hand Guard Shells No Brackets- $159.00

To Order, Use Our Online Store
or call (774) 849-5097


RevXP-logo

The Original! Carbon Fiber Hand Guards — XP Chassis

These medium sized carbon fiber hand guards are designed to provide function and a clean, aggressive appearance. This specific model offers 50% more wind and debris coverage than available stock and aftermarket plastic hand guards.

Each Hand Guard has an ergonomic, cupped-shaped inside, keeping your hands safe from your buddy’s “roost” and any unwanted tree branch slap.

Each Hand Guard is equipped with a super high quality CNC machined aluminum bracket system. The aluminum brackets are engineered to withstand vibration, tree branches, and rollover contacts. All aluminum brackets are fastened together using high quality stainless steel metric hardware. The bracket system also has two horizontal adjustments to allow personalized shield fit.

Hand Guard sets may be purchased without brackets.

Price: Hand Guard Kit with Billet Brackets- $239.00

Price: Carbon Fiber Hand Guard Shells No Brackets- $139.00

To Order, Use Our Online Store
or call (774) 849-5097

Ski-Doo Hand Guard 1
Hand Guard, front view
 
Ski-Doo Hand Guard Shield
Precision CNC Machined
Mounting Brackets
Ski-Doo Hand Guard Shield 3
Hand Guard Pair, front view

REV XP

“MX” Style Carbon Fiber Hand Guards – XP Chassis

These “MX”/Moto-style Hand Guards provide great protection for flying roost debris and are rigid enough to keep sagging branches off of your hands. The Moto Guards have a clean, trick shape and weigh almost nothing!

       
 
REV XP accessories
REV XP accessories
 
 

Front View
(Click to enlarge photo)

Moto Guards five you great roost and tree branch
protection (Click to enlarge photo)

 

Each Hand Guard is equipped with a super high quality CNC machined aluminum bracket system. The aluminum brackets are engineered to withstand vibration, tree branches, and rollover contacts. All aluminum brackets are fastened together using high quality stainless steel metric hardware. The bracket system also has two horizontal adjustments to allow personalized shield fit.

Hand Guard sets may be purchased without brackets.

Price: Hand Guard Kit with Billet Brackets- $199.00

Price: Carbon Fiber Hand Guard Shells No Brackets- $99.00

To Order, Use Our Online Store
or call (774) 849-5097

 
^ To top of page
RPM Composites, Inc.    774.849.5097    info@rpmcomposites.com